Table of Contents
Advertisement
Hardware Manual
Chapter 4: Maintenance
IMPORTANT: Read the
maintenance to the gimbal.
4.1. Service and Inspection Schedule
Inspect the AMG at least once per month. The need for a longer or shorter inspection interval will
depend on the application and conditions, such as the duty cycle, speed, and environment.
Monthly inspections should include but not be limited to:
Visually inspect the stage and cables.
l
Re-tighten loose connectors.
l
Replace or repair damaged cables.
l
Clean the AMG and any components and cables as needed.
l
Repair any damage before operating the AMG.
l
Inspect and perform an operational check on all safeguards and protective devices.
l
www.aerotech.com
Safety Procedures and Warnings
(on
Page
8) before you do
AMG
43
Advertisement
Table of Contents
