AMG
Before you operate the stage, let it stabilize at room temperature for at least 12 hours. This will
ensure that all of the alignments, preloads, and tolerances are the same as they were when they
were tested at Aerotech.
Each stage has a label listing the system part number and serial number. These numbers contain
information necessary for maintenance or system hardware and software updates. Locate this label
and record the information for later reference.
Shipping Brackets
Shipping brackets (typically red, anodized aluminum) might have been installed to secure the system
prior to shipment. The shipping brackets, if installed, will need to be removed prior to machine start
up.
Figure 1-1:
Shipping Brackets
14
Hardware Manual
www.aerotech.com