Chapter 1: Overview; Table 1-1: Model Options - Aerotech AMG Series Hardware Manual

AMG Hardware Manual

Chapter 1: Overview

N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual's release. Refer to www.aerotech.com for the most up-to-date information.
Table 1-1: Model Options
AMG Series Direct-Drive Gimbals
AMG200 200 mm nominal aperture
AMG300 300 mm nominal aperture
AMG400 400 mm nominal aperture
AMG500 500 mm nominal aperture
AMG600 600 mm nominal aperture
Feedback (Required)
-E1 Incremental encoder, 1 Vpp
-E2 Incremental encoder, TTL, x5 interpolation
-E3 Incremental encoder, TTL, x50 interpolation
Metrology (Required)
-PL1 Metrology, uncalibrated with performance plots
-PL2 Metrology, calibrated (HALAR) with performance plots
www.aerotech.com Chapter 1
Overview
9