Lincoln CORSAIR 2023 Owner's Manual page 483

Tire Sealant and Inflator Kit - Plug-In Hybrid Electric Vehicle (PHEV)
8. When the recommended tire pressure is
reached, turn off the kit, unplug the
power cable, and disconnect the hose
from the tire valve. Re-install the valve
cap on the tire valve and return the kit to
the rear of the vehicle.
9. Drive the vehicle 4 mi (6 km) to distribute
the sealant evenly inside the tire.
Note: If you experience any unusual
vibration, ride disturbance or noise while
driving, reduce your speed until you can
safely pull off to the side of the road to call
for roadside assistance. Do not proceed to
the second stage of this operation.
Second Stage: Checking the tire
pressure with the inflator kit
WARNING: If the tire does not inflate
to the recommended tire pressure within
15 minutes, stop and call roadside
assistance.
WARNING: The power plug may get
hot after use and should be handled
carefully when unplugging.
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
Check the air pressure of your tires as
follows:
E175983
1. Remove the valve cap from the tire valve.
2. Firmly screw the air compressor hose
onto the valve stem by turning clockwise.
3. Push and turn the dial clockwise to the
air position.
4. If required, turn on the compressor and
adjust the tire to the recommended
inflation pressure.
5. Unplug the hoses, re-install the valve cap
on the tire and return the kit to the rear
of the vehicle.
479
What to do after the tire has been
sealed
After using the kit to seal your tire, replace
the sealant canister. Sealant canisters and
spare parts can be obtained at an authorized
dealer. Empty sealant canisters may be
disposed of at home. However, canisters still
containing liquid sealant should be disposed
of in accordance with local waste disposal
regulation.
Removal of the sealant canister from the
kit
E175984
1. Unwrap the dual purpose hose (black
tube) from the compressor housing.