Moonroof; Opening And Closing The Sunshade; Opening And Closing The Moonroof - Lincoln CORSAIR 2023 Owner's Manual

OPENING AND CLOSING THE
SUNSHADE
WARNING: Do not leave children
unattended in your vehicle and do not let
them play with the sun shades. Failure to
follow this instruction could result in
personal injury.
The controls are on the overhead console.
Opening the Sun Shade
Press and release the switch to
activate the one-touch open
E312249
feature. To stop movement, press
the switch a second time. The sun shade also
opens when you open the moonroof.
Note: The sun shade stops short of its fully
opened position for the comfort of rear
passengers. To fully open the sun shade,
press the switch again.
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM

Moonroof

(If Equipped)
Closing the Sun Shade
Press and release the switch to
activate the one-touch close
E312250
feature. To stop movement, press
the switch a second time.
Note: If fully open, the sun shade stops after
covering the rear glass panel. Press and
release again to fully close the sun shade.
Note: The sun shade does not fully close
unless the moonroof glass is fully closed.
OPENING AND CLOSING THE
MOONROOF
WARNING: Do not leave children
unattended in your vehicle and do not let
them play with the moonroof. Failure to
follow this instruction could result in
personal injury.
136
The moonroof controls are located on the
overhead console and have a one-touch
open and close feature. To stop its
movement during one-touch operation, press
the control a second time.
Opening the Moonroof
Press and release the switch to
E340663
activate the one-touch open
feature. To stop movement, press
the switch a second time.
Closing the Moonroof
WARNING: When closing the
moonroof, verify that it is free of
obstruction and make sure that children
and pets are not in the proximity of the roof
opening.
Press and release the switch to
E340636
activate the one-touch close
feature, from either the open or
vent positions. To stop movement, press the
switch a second time.