Hybrid Electric Vehicle Information - Troubleshooting - Lincoln CORSAIR 2023 Owner's Manual

Hybrid Electric Vehicle Information - Plug-In Hybrid Electric Vehicle (PHEV)
The indicator remains on when your vehicle
is on, whether the engine is running or not,
to indicate your vehicle is capable of
movement using the electric motor, gas
engine or both.
Typically, the engine does not start unless
the vehicle is cold, a climate control change
is requested or you press the accelerator
pedal.
HYBRID ELECTRIC VEHICLE
INFORMATION – TROUBLESHOOTING
HYBRID ELECTRIC VEHICLE
INFORMATION – WARNING LAMPS
Illuminates if your vehicle has an
electrical component fault or failure
E384927
that causes your vehicle to shut
down or enter a limited operating mode. A
message may appear in the instrument
cluster display.
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
HYBRID ELECTRIC VEHICLE
INFORMATION – INFORMATION
MESSAGES
Message
Stop Safely Now Displays when a
malfunction occurs
in the high voltage
electric system. Stop
your vehicle as soon
as it is safe to do so.
Have your vehicle
checked as soon as
possible.
HYBRID ELECTRIC VEHICLE
INFORMATION – FREQUENTLY ASKED
QUESTIONS
What should I do if the vehicle runs out of
fuel and the high voltage battery is out of
charge?
Refuel and start your vehicle normally.
The engine will recharge the high
voltage battery.
214
Why does the engine sometimes start at
key-on?
The vehicle's computer determines if an
engine start is required at key-on. It
Action
starts the engine when necessary for
cabin heating, windshield defrost, or if
the outside temperature is low.
Can I put E15 or E85 in my vehicle, and how
will it affect my fuel economy?
Your hybrid vehicle can use E15 (15%
ethanol, 85% gasoline) fuel, but you may
notice slightly reduced fuel economy
because ethanol contains less energy
per gallon than gasoline. Your hybrid
vehicle is not designed to use E85 (85%
ethanol).
Why does it take a long time before the
engine shuts down?
There are several reasons the engine
stays on for an extended amount of time
when you first start it. One common
reason is to make sure that the
emissions components are warm
enough to minimize tailpipe emission.
As the climate gets cooler, the
engine-on time is extended.