Advertisement
Step 4: Mounting WindshieldFone
I
Clean the windshield surface where you intend to
adhere the suction cup, then let dry completely.
We recommend using rubbing alcohol to clean
both the windshield and the suction cup.
K
Firmly press the Suction Cup against the
windshield.
Step 5: Adjusting to Your Phone Width
M
Loosen Knob A and fully open the phone holder.
Place your phone into the Holder and adjust it to
fit the width of your phone.
J
Ensure the Lever on the Base is in the release
position and that Knobs C and D are facing up.
L
While maintaining pressure on the base of the
mount, press the lever toward the windshield until
it snaps securely into place.
N
Tighten Knob A.
© 2022 MacNeil IP LLC
67WF1
Advertisement
