Table of Contents
Advertisement
Chapter 10. Statistics
Yellow Alarm
If A
one or more times during the given interval.
PLL Alarm
A
T1 circuit are set to provide timing.
Path Code
Number of path code violations. Path code violations include
frame bit errors for D4 framing and superframes with CRC errors
for ESF framing.
Line Code
Number of line code violations. Line code violations include BPVs
that are not part of B8ZS code or excess zero violations.
Length Error
Number of frames received with fewer than 5 octets or greater than
4500 octets. This link violation is also reflected in the D
F
RAME
EA Violation
Number of frames received with an error in the extended address
(EA) bit field of the frame relay header.
Encapsulation Error
Number of frames received on a dedicated management DLCI that
have RFC 1490 errors. These errors are also reflected in the
D
If both management DLCIs are shared, the E
is N/A. See the section Management DLCI 1 and 2 (DLCI 1 and 2) on
page 7-5 for more information.
Inactive DLCI
Number of frames received on an inactive DLCI.
Invalid DLCI
Number of frames received on a DLCI that is out of range. The
valid DLCI range is 16-1007.
10-14
is displayed, the telco end of the T1 was out of frame sync
LARM
displayed in this field usually signifies that both ends of the
LARM
field.
F
field.
ISCARD
RAME
TSU IQ+ User Manual
ISCARD
E
NCAPSULATION
RROR
61200275L1-1
field
Advertisement
Table of Contents
