Table of Contents
Advertisement
Chapter 8. Configuring DBU Options
Local Loopback
This forces the PRI into loopback on the network. This option can
be used instead of setting the loopback up using loop codes from
external test equipment.
Choices: N
Transmit PRM
Set this entry to Y
facility data link (FDL) per ANSI T1.403.
Switch Type
Select which type of telco CO switch is providing the ISDN service.
This information is available from your service provider.
Choices: L
LDN
Enter the LDN for this location. This information is available from
your service provider.
DCE Options
The DCE O
card is installed.
Interface Type
Select the connector type for the
Choices: EIA-232; V.35.
DBU Bit Rate
Set to the operating speed of the
Choices: 0 to 1536 kbps
8-10
, P
, and L
ONE
AYLOAD
to enable the unit to send messages across the
ES
5ESS, DMS 100, N
UCENT
field is available when the External DCE option
PTIONS
TSU IQ+ User Manual
.
INE
.
ATIONAL
interface.
DCE
interface.
DBU
61200275L1-1
Advertisement
Table of Contents
