Chapter 3. Operation
Next, you will see the following screen (Figure 3-12).
-------------------------------------------------------------------
Any key to continue or Ctrl-L <Enter> to exit...
-------------------------------------------------------------------
7.
8.
3-14
Press
or any key to continue.
Enter
If the wrong DLCI is entered or a network problem exists, the
screen freezes at the A
CNTL+L to terminate the Telnet session.
Next, you will be prompted for a password. The default
password is adtran.
You can change this password using the S
menu. This option is only available via the terminal.
TSU IQ+ User Manual
Figure 3-12. Continue or Exit Screen
NY KEY TO CONTINUE
YSTEM
prompt. Press
C
sub-
ONFIG
61200275L1-1