Disk Drive Leds - HPE D3000 Installation Manual

Disk drive LEDs

Two LEDs indicate drive status.
NOTE: Both the D36x0 LFF and D37x0 SFF drive carrier system use I2C communication for drive authentication, failure
and configuration info, activity animation and enhanced LEDs.
Item Description
1 Drive UID LED
2 Activity ring
3 Do not remove
4 Drive status
1 2
4
Status
Solid blue
Off
Rotating green
Off
Solid white
Off
Solid green
Flashing green
Flashing amber/green
Flashing amber
Solid amber
Off
3
State
Locate requested for this drive by a
host application
Locate off
Drive activity
No activity
Do not remove the drive. Removing
the drive causes one or more of the
logical drives to fail.
Drive is safe to remove. Will not cause
a logical drive to fail.
The drive is a member of one or more
logical drives.
The drive is rebuilding or performing a
RAID migration, stripe size migration,
capacity expansion, or logical drive
extension, or is erasing.
The drive is a member of one or more
logical drives and predicts the drive
will fail.
The drive is not configured and
predicts the drive will fail.
The drive has failed.
The drive is not configured by a RAID
controller.
33
Reference