3 WORK
3.3
3.4
3.5
8
Checking throttle cable play
400192-11
Adjusting throttle cable play
V00671-10
Removing the passenger seat
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable
.
A
Throttle cable play
»
If the throttle cable play does not meet specifications:
–
Adjust the throttle cable play. (
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Check the throttle cable routing.
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve
.
–
2
Loosen lock nut
.
–
Adjust the throttle cable play with barrel adjuster
Guideline
Throttle cable play
–
2
Tighten lock nut
.
–
1
Slide on sleeve
.
Preparatory work
–
Remove the front rider's seat. (
3 ... 5 mm (0.12 ... 0.2 in)
p. 8)
3
.
3 ... 5 mm (0.12 ... 0.2 in)
p. 9)