Shimano NEXUS SG-C7002-5 Dealer's Manual page 33

Installation/removal
Installation of the shifting cable
6. Set the inner cable and outer casing.
Set the inner cable in the pulley as shown in the figure, insert the inner cable into the slit in the cassette joint
bracket, then securely set the outer casing holder into the outer casing holder section of the cassette joint.
Bracket
Pulley
Bracket
Outer casing
holder section
Slit
Outer casing
holder
Check that the inner cable is correctly seated inside the pulley guide.
Inner cable
Pulley
Bracket
Slit
Outer casing
holder section
Guide
Bracket
Outer casing
holder
Guide
33