Shimano NEXUS SG-C7002-5 Dealer's Manual page 32

Installation/removal
Installation of the shifting cable
5. Set the inner cable fixing bolt unit.
(1) Fit the inner cable fixing bolt unit into the notch in the pulley.
(2) Turn the cable 60° clockwise or counterclockwise and attach it to the hook.
Pulley
Inner cable fixing bolt unit
Notch in pulley
Hook
Some models enable the outer casing holder of the cassette joint to be installed first by turning the
pulley of the cassette joint.
(3)
(2)
or #14 spoke
Inner cable fixing bolt unit
(1)
Hole in pulley
Notch in pulley
Pulley
Hook
32