Shimano NEXUS SG-C7002-5 Dealer's Manual page 31

Installation/removal
Installation of the shifting cable
4. Install the inner cable fixing bolt unit.
After checking that the end of the outer casing is securely set in the cable adjustment barrel of the shift
lever, secure the unit at the specified length while pulling the inner cable.
SG-S7001 (internal 11-speed): 184 mm
SG-S7001 (internal 8-speed): 145 mm
SG-C6001 / SG-C6011 (internal 8-speed): 101 mm
SG-C7000 / SG-C7002 (internal 5-speed): 145 mm
Inner cable fixing bolt unit
3.5 - 5.5 N·m
10 mm
Specified length
ALFINE: 75 mm or less
NEXUS: 63 mm or less
Specified length
Specified length
Use the special inner cable fixing bolt unit.
When installing the inner cable fixing bolt unit, use the setting tool TL-S700-B / TL-CJ40.
TL-S700-B (145 mm / 184 mm)
Inner cable mounting nut
Inner cable fixing washer (black)
Inner cable fixing bolt (black)
TL-CJ40 (101 mm / 127 mm)
31