Child Lock Function; Wifi Function - Zephir ZMW4000V Instruction Manual

1. Press "
" button ,set the timer up to 24 hours,keep press " " button to increase the hours from
00--24(00=close,01=1hour,02=2 hours...24=24 hours ect.) and the " " light is on.
PS:set as "00" means no set timer ,the " " light is off.
4) THERMOSTAT INSTRUCTIONS
1. To adjust temperature,press the "
" to set the desired temperature and the temperature set
from 10℃ to 49℃
2. When the air temperature drops 2 degree below the set temperature,the heater will start heating
with "I/W"(1000W).
3. When the air temperature drops 4 degree below the set temperature ,the heater will start heating
with "II/H "(2000W).
4. When the air temperature high 1 degree or ≤ the set temperature,the heater will blow the cold air .
5) WINDOW OPEN FUNVTION
" button, the "
1.Press " " light is on.The appliance is working as smart saving energy
models.(In this function,the appliance is check and record environment temperature in
immediately.It will stop working,when the appliance check the environment are drop ≧3 ℃
within 1
minute.The user should restart the appliance with "ON/OFF" button)
" button again, the "
2 .Press " " light is off.Window Open Function is closed.
6) CHILD-LOCK FUNCTION
" button, the heater light is off (except power light),he child lock function is activated.
3. Press "
" button again, the heater light is on,the child lock function is cancelled.
Press "

7) WIFI FUNCTION

Connection by WIFI
1.Use your phone to scan the QR code below or search "Tuya Smart" in
Application on market to download and install the App.
2.Select your country code, enter the cellphone number and tap "Get" to get a message
containing verification on code.
3.Select The product category "Small Home Appliance" then select "Heater"symbol.
3.Enter the verification on code in the message and tap"Login" to login the App.
4.Switch on the product and make sure the product is in WIFI covered environment. The indicator
light will rapidly blinks. If the indicator light do not rapidly blinks, please press "One start Button "