Lenovo ThinkSystem ST250 V2 Setup Manual page 109

Hide thumbs Also See for ThinkSystem ST250 V2:
Table of Contents

Advertisement

S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
About this task
Attention:
• Read the
"Installation guidelines" on page 61
• Turn off the server and peripheral devices, and disconnect the power cords and all external cables (see
"Power off the server" on page
Watch the procedure
A video of this procedure is available at YouTube:
DoEcxrm2zKNpaKOdZ3f8Qc
Procedure
Note: Your system might look slightly different from those shown in the illustrations.
Step 1.
Unlock ST250 V2 front door.
a.
Slide and push the key into the corresponding hole on the front door and turn it clockwise to
unlock the door.
b.
Open the front door.
to ensure that you work safely.
106).
https://youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 3
Server hardware setup
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d8f7d8g

Table of Contents