Quectel SC200K Series Instruction Manual page 54

GPIO_52 107
GPIO_28 108
GPIO_123 109
GPIO_55 110
GPIO_90 123
GPIO_91 112
GPIO_92 113
GPIO_93 124
GPIO_94 115
GPIO_95 177
GPIO_96 242
GPIO_7 264
GPIO_8 265
GPIO_17 246
GPIO_18 267
GPIO_30 239
GPIO_16 178
GPIO_15 179
GPIO_25 260
GPIO_26 262
NOTE
1. For details of GPIO configuration, see document [2].
2. For external inputs with hardware mechanical jitter, such as keypad, etc., select GPIOs that can be
multiplexed into EXTINT functions.
3. To provide enable signal for ICs like flashlight, switching charger, DC-DC, etc., select GPIOs whose
default state is pull-down.
4. When a non-EXTINT GPIO is used as an interrupt input, module wakeup can only be triggered by
level and cannot be triggered by edge.
SC200K_Series_Hardware_Design
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
DIO
Smart Module Series
53 / 105