The Scanner Menu; Get Current Scanner Info; Scanner Control; The Preferences Menu - Microtek ArtixScan DI 1210 Reference Manual

The Scanner Menu

Get Current Scanner Info

This command displays information about your current scanner. When you choose
this command, a dialog box appears showing the scanner model, scanner ID number,
firmware version, and the equipment.

Scanner Control

This command lets you specify a lead time for turning off the scanning lamp, thus
saving power. The dialog message "Auto Power Saving mode if idled for N minutes"
allows you set the idle time. By default, the idle time is 15 minutes.

The Preferences Menu

Invert

This command creates a negative effect of an image. The Invert effect is applied to
all the frames, not just the selected frame. When an image is inverted, the brightness
value of each pixel is converted to the inverse value on the 256-step color values
scale. For example, a pixel in a positive image with a value of 255 is changed to 0, and
a pixel with a value of 5 is changed to 250.

Scan Quality

This command provides you with three levels of scanning quality: Normal, Fine, and
Best. The higher the image quality, the longer the scanning time and the greater the
disk space required.

Show/Hide Frame Information Window

These commands allow you to switch between showing or hiding the Frame
Information window on the screen. The Frame Information window is a floating
window that provides information about the frame. Each frame contains the
following elements: Visible, Name, Attribute, and Image Size.
35