Preparations before the initial use
Confirm if inlet valve is OPEN.
Confirm battery has been installed in the "remote" correctly
Confirm no obstacle in front of product.
After toilet self-inspection completed, it is normal to hear motor rotating and water flow noise. When night light blink
indicates self-inspection is in process. When night light stop blinking indicates self-inspection is completed.
Default ex-work status for initial use:
Front wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Auto cover OPEN/CLOSE: ON, distance mid
Auto flush function: ON
Auto cover OPEN/CLOSE: Not applicable in Hong Kong market
Kohler Co.
Fig.#21
Rear wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Auto UV function: ON
E-water function: ON
49
Spiral wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Deodorizer: ON
Ring temp: Mid
Air temp: Mid
Night light: ON
Energy saving mode: OFF
1323363-T01-E