Kohler K-77797T-0 Installation Instructions Manual page 41

C. 1. Confirm the drain hole center and mark down the "+" centerline perpendicular to the floor and
finished wall.
2. Mark center for width direction on toilet.
3. Measure drain hole center to floor height H.
4. Dismantle toilet side panel, place on the protection rag, rotate nut as shown; adjust toilet
discharge pipe to floor height so to match drain hole height on the wall.
5. Align and toilet to floor and wall centerline and against the wall naturally, mark left and right
anchor bolt hole position H.
D.
Drill two holes and insert plastic inserts and T-bolts (Purchased by customer).
Kohler Co.
3/8
10mm
41
2 Vitreous installation holes
7
H
8
9
1323363-T01-E