15. Tension correction
❶
<Sewing screen (Maintenance personnel mode)>
❸
<Sewing data edit screen>
❹
❺
❽ ❾
<S113 Needle thread tension correction screen>
❷
❻
❼
1)
Press
the maintenance personnel mode.
The "sewing data edit screen" is displayed.
2)
Press
Press
The "S113 Needle thread tension correction
screen" is displayed.
3)
Select the thread tension correction method
you want to use from the four methods de-
scribed below:
❹ Not use
❺ Sewing speed (initial setting)
❻ Bobbin thread remaining amount
❼ Both (the sewing speed and the bob-
bin thread remaining amount)
4)
Select the type of the tension correction data.
・In case of correcting the tension in accor-
dance with the sewing speed.
Select the chart number you want to save
from among 1 to 4 with
Then, press
Refer to
sewing speed" p.22
procedure after the above.
・Press
the thread tension in accordance with the
remaining amount of bobbin thread.
Refer to
remaining amount of bobbin thread"
p.23
for the steps of procedure after the
above.
*
Press
entered and return the screen to the "Sewing
data edit screen".
– 21 –
❶ on the sewing screen under
❷ to proceed to the next page.
❸ .
❾ .
"15-1. Tension correction and
for the steps of
when you want to correct
"15-2. Tension correction and
to confirm the data you have
❽ .