Document History - ASCOM H952T Installation Manual

Installation Guide
H/U952T Terminal Transmitter
7

Document History

Version
A
B
C
D
E
F
G
3 July 2013 / Ver. G
Date Description
13 November 2002 First version
6 July 2006 Information and requirement for On-board
installation have been added to the document.
16 May 2007 Insert of regulatory text for EU & EFTA
3 March 2011 Added text to section Regulatory Compliance
Statements.
3.4 Wiring Runs
not allowed to make an openings on the front cover
added.
3.8 Coax Connection to Antenna
Information about the antenna cable added.
Galvanic isolation added.
3.1 Mounting
mounting vertically added.
3.6 Connection of Supply Voltage
external fuse added.
Minor changes
11 May 2012 Added instruction to protect the unit against
current exceeding 20 A.
Added
Changed references to system documents.
Renamed old systems to Ascom Paging System.
Removed section Connection to Slave Transmitter.
Removed H/U989M Monitor Receiver.
Removed H/U954 Power Amplifier.
Minor text changes.
12 April 2013 Added note to
page 10 about recommendation to avoid potential
power supply disturbances.
3 July 2013 In Appendix B: Coaxial Connectors
Added information about an additional brand of the
TNC coax connector.
on page 8 Information about that is
on page 6 Figure and text about
FCC Compliance Statements.
3.6 Connection of Supply Voltage
TD 92022EN
on page 11
on page 10
on
on page 18:
15