Printing And Data Transfer From Zodiac; Troubleshooting - natus Madsen Zodiac User Manual

User Guide
10

Printing and data transfer from Zodiac

Report
Printing from the built-in printer
If the device is configured to print directly from the built-in printer, press the Report button to print the test results.
Remember to write the patient's name on the print-out.
Transferring data to Otosuite
To change the patient in Otosuite, while you are working with Otosuite you can retrieve the patient's test results
from Zodiac.
11

Troubleshooting

11.1 Probe problems - possible causes
Testing may be complicated by factors which can result in leakage or probe problems.
• The eartip does not fit well
• The eartip is not inserted properly in the ear canal
• The probe tip opening is blocked by the wall of the ear canal
• The eartip may be old or hardened
• The probe tip has not been attached properly to the probe body
• Hairs in the ear canal get between the eartip and the wall of the ear canal
• The probe tip is occluded by debris or fluid
• Perform a probe check to rule out malfunction of the probe.
26
You can print test results directly from Zodiac if it is equipped with a
built-in printer.
Madsen Zodiac