APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 508

Gather the cables on the right semi-

arch brace and fasten them provision-

ally with a clamp.

Fit the left semi-arch brace, applying

the five coupling screws. Do not strain

the connection between the two semi-

arch braces, as this would prevent the

removal of the clamp.

Cut and remove the provisional clamp.

Fit the cable grommet from the left

hand side of the arch brace, tighten the

two screws on the headstock.

Tighten the five coupling screws.

Fit the turn indicator connectors in the

relative housings, noting the colours of

the wires identifying the correct side.

Join the remaining connectors and ar-

range the cable carefully in the space

available within the arch brace. Note

that there are two pairs of connectors

which may be connected incorrectly.

The male connector on the cable with the red strip

must be connected to the female connector on the

longer cable.

Reconnect the instrument panel con-

RSV4 Factory a-PRC