APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 148

Electrical system

With this function the instrument panel can update the keys. Up to 4 keys can be stored.

The user code is first requested to be entered:

ENTER THE CODE

After entering the correct code, the following message should be shown on the display:

INSERT THE X KEY

INSERT THE X+1 KEY

At least one key must be programmed for the next start-ups. If no other key is inserted within 20 seconds

or if there is no power or after the fourth key is programmed, the procedure finishes and all the functions

of the vehicle and the instrument panel must be enabled (even if only one key has been programmed).

This menu selects the unit of measurement, either for the speed or the total or partial odometers.

Select the user interface language from this menu.

Service warning light reset

VEHICLE SERVICING RESET

This function is used to reset vehicle servicing. Using this function, the odometer can be reset only once

within the first 200 km (124 mi) of the vehicle, provided this has not been done by the Quality Check.

In order to activate this function follow the instructions in the DIAGNOSIS section.