RSV4 Factory a-PRC
•
Ensure that the hexagonal area on the
pin head (2) is inserted correctly in the
hexagonal seat inside the adjustment
bushing (3).
•
Fit and hand-tighten the counter-lock
ring nut by a few turns (1).
•
Put some grease on the swingarm pin
nut as indicated
•
Fit and the washer and the swingarm pin fixing nut on the pin and hand-tighten the nut.
•
Working from the right hand side of the
vehicle, turn the swingarm pin (2)
clockwise. This turns the adjustment
bushing (3), driving the swingarm in
until fully seated.
•
Tighten the locking ring nut (1).
Chassis
CHAS - 445