6.1.9 Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RS401 Installation Manual

Certification
6.1.9 RoHS
6.1.9 RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.10

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
6.2

EMC and Environmental Type Tests

The RUGGEDCOM RS401 has passed the following EMC and environmental tests.
IEC 61850-3 EMC Type Tests
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
38
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
Communications Networks and Systems for Power Utility Automation – Part 3:
General Requirements
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
Test
ESD
Radiated RFI
Burst (Fast
Transient)
Surge
Description
Enclosure
Contact
Enclosure Air
Enclosure Ports
Signal Ports
DC Power Ports
AC Power Ports
Earth
Ground Ports
Signal Ports
https://
Test Levels
±8 kV
±15 kV
20 V/m
±4 kV at 2.5 kHz
±4 kV
±4 kV
±4 kV
±4 kV Line-to-Earth,
±2 kV Line-to-Line
RUGGEDCOM RS401
Installation Manual, 11/2022, C79000-G8976-1017-12
Severity
Levels
4
4
4
4
4
4