Siemens SIMATIC NET RUGGEDCOM RS401 Installation Manual page 19

Installing the Device
2.3.1 Mounting the Device on a DIN Rail
2.
Removing the Device
To remove the device from a DIN rail, do the following:
1.
10
Panel/DIN Rail Adapter
1
DIN Rail
2
Screw
3
Figure 2.1 Mounting the Device to a DIN Rail (Front Panel Mount Option)
1
2
3
Panel/DIN Rail Adapter
1
DIN Rail
2
Screw
3
Figure 2.2 Mounting the Device to a DIN Rail (Side Panel Mount Option)
Install one of the supplied #8-32 lock screws on either side of the device to
secure the adapters to the DIN rails.
Loosen or remove the #8-32 lock screws on both sides of the device.
1
2
3
2
Installation Manual, 11/2022, C79000-G8976-1017-12
1
2
2
2
1
RUGGEDCOM RS401