Table of Contents
Advertisement
REPLACING THE BLADE
1. Stop the product.
2. Set the cutting deck to the lowest cutting
height.
3. Loosen the cable lock
on the two blade
cables between the deck and the
and disconnect the cables.
4. Lift the deck clip release lever located at
the top, rear of the cutting deck. While
lifting the latch, grab the deck with your
other hand, then lift and slide forward
to detach the deck clip from the hook.
Repeat on the opposite side.
5. Slide the cutting deck out of the product,
and turn the deck upside down.
1
2
frame,
3
4
5
1
2
1
p.20
2
25
Maintenance
Advertisement
Table of Contents
