Ryobi R80XZTR54 Manual page 30

LEVELLING THE CUTTING DECK
1. Stop the product.
2. Lift the side discharge chute.
3. Position the blades so that the ends point
towards the sides of the product.
4. On the outside edge of each blade,
measure the distance from the bottom
edge of the side of the blade to the
ground.
NOTE: If the distance between the two sides
is greater than 3.1 mm (1/8 in.), a side-to-side
adjustment is necessary.
30
Maintenance
1
2
3
4
1
< 3.1 mm
p.20
2
> 3.1 mm