Table of Contents
Advertisement
CHARGER LED INDICATOR
Battery
Charger
pack
status
inserted
Power on
No
Testing
Yes
Error
Yes
Charging
Yes
Ready
Yes
MAINTENANCE SCHEDULE
Check the brake operation.
Check the tyre pressure.
Check the side discharge chute and
operator presence safety interlock
systems.
Check for loose fasteners.
Remove all foreign materials from the
product.
Check/Replace the mulching blades.
Clean the battery terminals.
Check and charge the battery.
NOTE: Maintenance should be performed more frequently when the product is used in dusty areas.
When the product has exceeded the maximum figures specified in the table, maintenance should still be cycled according to the intervals of
time or hours stated herein.
If you are unsure how to perform any of the maintenance items listed above, have the product serviced by an authorised service centre only.
Battery
Green
Red LED
pack
LED
-
On
Off
Hot
Off
Off
Cold
Off
Off
-
Flash
Flash
-
Off
Flash
-
Off
On
Inspect before
each use
x
x
x
x
x
x
x
Orange
LED
The charger is connected to the power supply.
Off
Connect to a battery pack or tool to begin charging.
Charger begins charging once the battery pack cools
down.
On
Charger begins charging once the battery pack
warms up.
●
If the status does not change after removing
and reconnecting the charger, charge a
different battery pack or tool.
Off
●
If a different battery pack or tool charges
normally, contact an authorised service centre.
●
If a different battery pack or tool still shows an
error status, replace the charger.
Off
The battery pack or tool is charging.
Charging is complete. The LED indicator will turn off
Off
after 10 minutes.
Every
Every
25
50 hours
hours
or yearly
x
x
Action
Before
Once a month
storage
during storage
x
x
x
Advertisement
Table of Contents
