Ryobi R80XZTR54 Manual page 14

1
Wear full eye protection, non-slip
heavy-duty gloves, substantial
footwear, and long trousers at all times
while operating the product. Do not
operate the product when barefoot or
wearing open sandals.
6
1
2
15mm
3
Attach the hitch plate to the rear side
of the product. Install and tighten the
bolts.
11
Remove the foam ring from the bottom
of the port.
14
Getting started
2
Insert the joystick through the dust
cover. Align the holes on the joystick
with the holes on the mounting shaft.
7
15mm
Press the center edge on the battery
bucket cover to release the latch.
12
2
Install the battery pack to the port.
Close the battery covers.
Insert the hex screws, and tighten them
securely with a hex key. Align the tabs
on the dust cover with the base and
press down to lock the dust cover into
place.
Open the cover.
13
1
Lift the charging port cover, and connect
the charger cable to the charging port.
3
3
1
8
1
2
2