Replacing The Blade - Ryobi RLM36B51SP Original Instructions Manual

MAINTENANCE

REPLACING THE BLADE

WARNING: Keep bare hands away from
blades. Blades continue to rotate after the
motor is switched off. Remove the isolator
key before maintenance. Use heavy-duty
gloves when replacing the blades.
NOTE: For a quality finish to your lawn,
replace the mowing blade every season.
1. Open the battery door. Remove the
isolator key and the battery pack. Close
the battery door.
2. Tilt the product on its side so that the
blade is vertical.
3. Clean away debris before changing the
blade.
4. Loosen the nut using a 15 mm spanner.
NOTE: Use a wood chock to stop the
blade from spinning during loosening
and tightening.
1
1
2
2
3
4
2
4
3
1
19