HMS Networks EWON COSY+ Quick Start Manual page 4

Set up a local WiFi access point on your Ewon
2. Set up a local WiFi access point on your Ewon
2.1. Enable WiFi Access Point and the DHCP Server
Within the Web Configuration Interface, you will first create and enable the WiFi Local Access Point on your
®
Ewon Cosy+ EC7133J_00MA, secondly you will enable the DHCP server on your Ewon
network.
First step: Enable and configure your WiFi Access Point
®
1. Verify your Ewon Cosy+ is connected and operative.
2. In your browser, access the Web Configuration Interface of your Ewon
3. From the left menu click on Set up and then on the subsection System.
4. Select Communication and click on Local
The Adress Setup section indicates the LAN Network information used by the Ewon
Figure 1. LAN Settings Overview
SSH-0303-01-EN
®
Cosy+ Enable a local WiFi access point on your Ewon
®
Cosy+
®
Cosy+ device for the LAN
®
Cosy+.
®
Cosy+.
®
Cosy+ device
Page 2 of 8