HMS Networks EWON COSY+ Quick Start Manual page 10

Configure WiFi Access Point using FTP
5. Configure WiFi Access Point using FTP
This section is for advanced use only.
If for some special reasons (mass configuration for example) you do not want to use the Ewon
interface for the configuration, the settings for the Access Point can also be set using an FTP access.
Hereunder are listed the corresponding parameters of the comcfg.txt file:
APEnabled:1
APSSID:Ewon_Wifi_AP
APPassphrase:MyWifiPwd
APBroadcastSSID:1
APChannel:0
LANDHCPSEnable:1
LANDHCPSStartIP:10.0.0.100
LANDHCPSEndIP:10.0.0.105
LANDHCPSLeaseTime:3600
DNSREnabled:1
LANDHCPSDns1:0.0.0.0
LANDHCPSDns2:0.0.0.0
LANDHCPSFilter:1
SSH-0303-01-EN
Enable a local WiFi access point on your Ewon
®
Cosy+ user
®
Cosy+ device
Page 8 of 8