Epson ET-4700 User Manual page 42

6. Enter your wireless password (or network name and then password).
• To enter characters, press the buttons on the numeric keypad.
• To change the character case or type, press the
• To move the cursor to the right or add a space, press the right arrow button.
• To move the cursor to the left, press the left arrow button.
• To enter symbols, press 1 on the numeric keypad.
• To delete the previous character, press the
• To delete all the characters, press the C clear button.
• When you finish entering characters, press the OK button.
7. If you want to print a network setup report, press the
button.)
Your product should now display a blue Wi-Fi symbol
Note: If the Wi-Fi symbol is not displayed on the LCD screen as shown above, you may have
selected the wrong network name or entered the password incorrectly. Repeat these steps to try
again.
Parent topic: Wi-Fi Infrastructure Mode Setup
reset button.
stop button.
start button. (Otherwise, press the
on the LCD screen.
42
stop