Epson ET-4700 User Manual page 206

5. Select Head Cleaning and press the OK button.
6. Press the start button to clean the print head.
Caution: Never open the inner cover or turn off the product during a cleaning cycle or you may
damage it.
You see a message on the LCD screen and the
When the cleaning cycle is finished, the
screen.
7. Select Nozzle Check, press the OK button, and press the
confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then run a nozzle check and try cleaning the print head again. If quality still does not
improve, run a Power Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related references
Where to Get Help
Related tasks
Checking the Nozzles Using the Product Control Panel
Refilling the Ink Tanks
power light flashes throughout the cleaning cycle.
power light stays on and you see a message on the LCD
start button to run a nozzle check and
206