Network Interface Specifications - Epson ET-4700 User Manual

Network Interface Specifications

Wi-Fi
Standard
Security
Frequency range
Maximum Radio-Frequency
Power Transmitted
Coordination modes
Ethernet
Standard
Communication mode
Connector
Security Protocol
SSL/TLS: HTTPS Server/Client, IPPS
Parent topic:
IEEE 802.11 b/g/n; IEEE 802.11n available only on the 20 MHz
channel
WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal
WEP (64/128 bit); not supported for Wi-Fi Direct mode
2.4 GHz
20 dBm (EIRP)
Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
Twisted Pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); disabled by default (see
link below to enable)
Note: The connected device should be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
Technical Specifications
279