Haverland TAC-0919 User Manual page 78

DRY mode
ldeal to reduce room humidity (spring and autumn, damp rooms
rainy periods, etc.).
ln dry mode, the appliance should be prepared in the same way
as for cool mode, with the air exhaust hase attached to enable
the moisture to be discharged outside.
To set this mode correctly:
• Press the M button a number of times until the
• ln this mode, fan speed is selected automatically by the appliance and can not be set
manually.
SWING function
This function is useful for select the up/down swing of air
Delivery.
To set this function correctly:
• Select the operating mode (cool, dry, fan) as
described above.
6
• Press the button several times, the deflector
will start or stop swing.
SLEEP function
This function is useful for the night as it gradually reduces operation of the appliance.
To set this function correctly:
• Select the cool or heat mode as described above.
• Press the � button.
The appliance operates in the previously selected mode.
When you choose the sleep function, the screen will reduce the brightness, and the fan
speed is low.
The SLEEP function maintains the room at optimum temperature without excessive
fluctuations in either temperature or humidity with silent operation. Fan speed is always at
Low, while room temperature and humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1 (1 ) per hour in a 2 hour
period. This new temperature will be maintained for the next 6 hours. Then the appliance
turn it off.
When in HEAT mode, the selected temperature will decrease by 1 (1 ) per hour in a 3 hour
period. This new temperature will be maintained for the next 5 hours. Then the appliance
turn it off.
The SLEEP function can be canceled at any time during operation by pressing the "Sleep",
"Mode" or "fan speed" button.
ln FAN or DRY mode, SLEEP function cannot be set.
Switch the unit of temperature
When the appliance is standby, press the
unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
d h
symbol appears.
°
°C/ F button, then you can change the
dh
-
-
•