Window Slider Kit Installation - Haverland TAC-0919 User Manual

• •
Window
Window slider
Fig.5
The window slider kit has been designed to fit most standard vertical and horizontal window
applications, however, it may be necessary for you to modify some aspects of the
installation procedures for certain types of windows. The window slider kit can be fastened
with screws.
Note: If the window opening is less than the minimum length of the window slider kit, eut the
end without the hold in it short enough to fit in the window opening. Never eut out the hole
in window slider kit.

WINDOW SLIDER KIT INSTALLATION

A) Panel (The second panel maybe net supplied).
B) Panel with one hole.
1. Parts:
C) Panel without hole (maybe net supplied).
D) Screw to Iock window kit in place.
SI ide Panel B and C into Panel A and size to widow width. Windows sizes vary. When
sizing the window width, be sure that the window kit assembly is free from gaps from gaps
2. Assembly:
and/or air pockets when taking measurements.
Horizontal
•
Window
Fig.6
!
1
• Cut on opposite
side of hale.
Window slider