Electrical Connections - Haverland TAC-0919 User Manual

• Young children should be supervised to ensure that they do not play with, operate or
climb on the appliance.
• If the appliance is making unusual sounds or is emitting smoke or an unusual odor,
unplug it immediately.
• Do not clean the unit with water. Water can enter the unit and damage the insulation,
creating a shock hazard. If water enters the unit, unplug it immediately and contact
Customer Service.
• Utilize two or more people to lift and install the unit.
• Be sure all accessories are removed from the packing before use.
• To avoid possible cuts, avoid contacting the metal parts of the appliance when removing
or re-installing the filter. lt can result in the risk of persona! injury.
• Do not black the air inlet or outlet of the appliance. Reduced air flow will result in poor
performance and could damage the unit.
• Always grasp the plug when plugging in or unplugging the appliance. Never unplug by
pulling on the cord. lt can result in the risk of electrical shock and damage.
• lnstall the appliance on a sturdy, level floor capable of supporting up to 11 0lbs(50kg).
Installation on a weak or unlevel floor can result in the risk of property damage and
persona! injury.
• Close all doors and windows to the room for most efficient operation.
IMPORTANT - GROUNDING METHOD
This product is factory equipped with a power supply cord that has a three-pronged
grounded plug. lt must be plugged into a mating grounding type receptacle in
accordance with the National Electrical Code and applicable local codes and ordinances.
If the circuit does not have a grounding type receptacle, it is the responsibility and
obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground
prong should not, under any circumstances, be eut or removed. Never use the cord, the
plug or the appliance when they show any sign of damage. Do not use your appliance
with an extension cord unless it has been checked and tested by a qualified electrical
supplier. lmproper connection of the grounding plug can result in risk of fire, electric
shock and/or injury to persans associated with the appliance. Check with a qualified
service representative if in doubt that the appliance is properly grounded.

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, check that:
• The mains power supply corresponds to the value indicated on the rating plate on
the back of the appliance.
• The power socket and electrical circuit are adequate for the appliance.
• The mains socket matches the plug. If this is not the case, have the plug replaced.
• The mains socket is adequately earthed. Failure to follow these important safety
instructions absolves the manufacturer of all liability.