Description Of The Display Screen; Operating From The Control Panel; Turning The Appliance On - Haverland TAC-0919 User Manual

DESCRIPTION OF THE DISPLAY SCREEN

1 COOL symbol
2 HEAT symbol *
3 FAN Speed indicator
4 TIMER symbol
" * "
means only the heat pump model have this function.
Note: When the unit is connected with phone, the Wi-Fi symbol is light on, and how to
connected with phone, please see the Wi-Fi manual.

OPERATING FROM THE CONTROL PANEL

The control panel is on the top of the appliance, enables you to manage part functions
without remote controller, but to fully exploit its potential, you must use the remote controller.
1 FAN button
2 DECREASE button
3 INCREASE button

TURNING THE APPLIANCE ON

Plug into the mains socket, then the appliance is standby.
Press the (9 button to make the appliance turn on. The last function active when it was
turned off will appear.
Never turn the air conditioner off by unplugging from the mains. Always press the
button (9 , then wait for a few minutes before unplugging. This allows the appliance to
perform a cycle of checks to verify operation.
6 5
2
5 Temperature symbol
6 Temperature indicator
4 MODE button
5 ON/OFF button
4
3