Haverland TAC-0919 User Manual page 70

1. Contrai panel
2. Deflector
3. Display screen
4. Handle (bath sides)
5. Castors
6. lntake grille
ACCESSORIES
PARTS
0
�
c=JI
1
0
Note: Ali the illustrations in this manual are for explanatory purposes only. Your appliance
may be slightly different.
INSTALLATION INSTRUCTIONS
EXHAUSTING HOT AIR
ln the Cool Mode the appliance must be placed close
to a window or opening so that the warm exhaust
air can be ducted outside.
First position unit on a fiat floor and make sure there's
a minimum of 17.7" (45cm) clearance around the unit,
and is within the vicinity of a single circuit outlet
power source.
1. Extend either side of the hase (Fig.1) and screw
the hase inlet (Fig. 2).
2. Extend the other side of the hase and screw it
to the hase outlet (Fig. 3).
3. lnstall the hase inlet into the unit (Fig. 4 ).
4. Affix the hase outlet into the window slider kit
and seal (Fig. 5&6).
The hase install is slightly different, please attention.
Note:
7. Remote contraller holder
8. Power cable
9. lntake grille
11. Condenser drain
12. Plug fixer
13. Air outlet grille
PARTS NAME
Hase inlet
Exhaust hose
Hase outlet
Window slider kit
Remote Contrai
Battery
QUANTITY
1 set
1 set
1 set
•
...
of hose Fi g.1
Extend the side
�
Flg.3