Table of Contents
Advertisement
^ Insert the base cover retainers on
both sides into the appliance
housing.
^ The face end of the angles on the
retainers must be flush with the front
of the toe-kick cover. If this is not the
case, adjust the retainers according
to the depth.
^ Insert the locking pins on both sides
to secure the retainers in the
appliance housing.
^ Now install the base cover with the
ventilation slits. There are two
fastening bolts on each side of the
base cover (see illustration detail).
These fastening bolts must be
inserted into the retainer holes.
Installation
33
Advertisement
Table of Contents
