Advertisement
Archangel Installation Guide
Offer the hinges up to the wet side of the fixed panel.
Ensure that all gaskets are in place ensuring that each
face of the glass is separated from the hinges by a clamp
gasket.
Only one side of the hinge will fit in the cutouts of the fixed
panel.
Refit the clamp gasket and clamp plate to the dry side of the
glass and attach using 2 x M6 screws.
Check that the clamp plate is fitted with the wide area
nearest the edge of the fixed glass.
Check that the hinge is aligned with the glass edge, is
central and properly aligned.
Tighten the hinge clamp screws
Page 11of 17
Advertisement
