Advertisement
Archangel Installation Guide
Thank you for purchasing
Please study these instructions carefully before assembly and installation and check all supplied parts immediately upon receipt.
Installation Tips:
The general principle of assembly is to assemble parts in the steps shown-first a dry assembly to check
fits or mark cutting or drilling positions and then a final assembly with silicone.
If a shower tray is used, ensure that it is level in all directions before installation.
Use a good quality, full length spirit level to ensure that the wall channel is perfectly upright.
When handling glass, use glass lifters and take care to ensure that corners or edges are not knocked.
When cutting aluminum extrusion, wrap the profile with masking tape first and cut through the taped
area - this will help protect the surrounding surface. Use a fine file to smooth cut edges.
Parts Supplied:
The parts supplied are illustrated on the following pages.
Please check them and contact Majestic Showers in the event of missing or damaged parts.
These instructions are for left and right-handed units. The diagram shows left-handed unit.
NB: NOT All parts are reversible.
the Archangel.
Page 2of 17
Advertisement
