Cleaning The System - GE Venue 50 Basic User Manual

User Maintenance

Cleaning the system

LCD Monitor cleaning and sterilization
NOTE:
NOTE:
Footswitch
NOTE:
6-16
Prior to cleaning any part of the system:
1. Turn off the system power.
To clean the monitor face:
Use the protective bag to wipe monitor face gently.
Or
Wipe the LCD monitor with the following cleaners:
• PDI Sani-Cloth Plus Germicidal Disposable Cloth (low
Alcohol)
• PDI Super Sani-Cloth Germicidal Disposable Cloth (high
Alcohol)
• PDI Sani-Cloth HB (Germicidal, Alcohol free)
• Alcohol (concentration no more than 75%)
DO NOT use a glass cleaner that has a hydrocarbon base (such
as Benzene, Methyl Alcohol or Methyl Ethyl Ketone) on monitors
with the filter (anti-glare shield). Hard rubbing will also damage
the filter.
When cleaning the screen, make sure not to scratch the LCD.
To clean the footswitch:
1. Disconnect the footswitch from the Venue 50.
2. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
The cloth should be damp, not dripping wet.
3. Wipe the external surfaces of the unit then dry with a soft,
clean, cloth.
–
Venue 50 Basic User Manual
Direction 5446729-100 English Rev. 7