Cleaning The System - GE LOGIQ E9 User Manual

After the Exam is Over

Cleaning the system

System Cabinet
NOTE:
NOTE:
Touch Panel
NOTE:
3-58
Prior to cleaning any part of the system:
1. Turn off the system power. If possible, disconnect the power
cord. See 'Power Off' on page 1-25 for more information.
To clean the system cabinet:
1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
The cloth should be damp, not dripping wet.
2. Wipe down the top, front, back, and both sides of the system
cabinet.
3. Wipe off excess cleaning agents.
Do not spray any liquid directly into the unit.
Other acceptable cleaning agents are:
• Ammonia
• Bleach (10 to 1 ratio of 5% home bleach)
• Hydrogen Peroxide / Hydrogen Peroxide Wipes
To clean the Touch Panel:
1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
The cloth should be damp, not dripping wet.
2. Wipe down the top, front, back, and both sides of the Touch
Panel.
3. Wipe off excess cleaning agents.
LOGIQ E9
Direction 5454884-100 English Rev. 1
–
User Guide