I-Command 2 System (Op Onal) - Hydropool 13FFP Aquaplay Owner's Manual

OPTIONAL I-COMMAND 2 SYSTEM
The Smart Phone App that is designed as a wireless hot tub control which allows you to pick
the water care se ngs that fit your schedule. Adjust filtra on and temperature se ngs and
create the ideal hot tub experience from inside your home. This op on is supported by your
iPhone®, iPOD touch®, iPAD® (requires iOS 8.0 or later) and Android Device
2.3.3 and up).
I-Command 2 (In. touch 2) comes with a state-of-the-art app and 2 pre-paired radio frequency
transmi ers:
One being part of the spa system and the second one, being connected to the Home Internet
router. Both RF transmi ers are pre-linked to one another, enabling an immediate and perfect
communica on between user and the spa.
1. Installing the home transmi er
The home transmi er is provided with an Ethernet cable and a power supply.
The in. touch 2 home transmi er unit must be installed inside the house, connected to a
router and powered by the provided wall transformer. A longer Ethernet cable may be used to
bring the home transmi er closer to the spa.
Simply connect the Ethernet cable into the RJ45 port of the in. touch 2 home transmi er and
in one of the available LAN ports on your router. To power up the home transmi er, plug the
provided wall outlet charger to a 120V (North American model) or 220V (European model)
household supply and connect the USB cable to the wall outlet and the home transmi er.
31
(requires Android